Laser Cut Acrylic Case for Gameduino

This is laser cut acrylic case for the Gameduino board.

Image may be NSFW.
Clik here to view.

The top and bottom cover are made from 3mm thick acrylic. The four side walls are 10mm. The reason for thick side walls so that it can be drill and tap. A 3.3mm hole is first drilled follow by a M4 tap.

Image may be NSFW.
Clik here to view.Image may be NSFW.
Clik here to view.

After all the side walls have been threaded the bottom panel is screwed in, together with the Gameduino and Arduino board.

Image may be NSFW.
Clik here to view.

Side walls, bottom panel and Gameduino screwed in place

Next the top panel with joystick and two button fixed.

Image may be NSFW.
Clik here to view.

Joystick and two buttons attached to top panel

Wire the joystick and push buttons to the Gameduino.

Image may be NSFW.
Clik here to view.

Plug in the USB, audio and VGA cable.

Image may be NSFW.
Clik here to view.

USB, audio and VGA cable plugged in

Time to play.

Image may be NSFW.
Clik here to view.

Gameduino and case in action

Parts List

• Gameduino
• Arduino
• Joystick
• Push Button
• Header Pin
• 9v PSU (optional)
• USB Cable

Documents

• Acrylic case laser cut drawing (DXF format)